Phone: 651-483-2798 Fax: 651-483-9221 Toll Free: 877-865-4154 Contact

Daro Series 610 Barrel Hinges

The 610 series barrel hinge is a weld on, bronze & ball bearing, hinge manufactured by welding and machining. These hinges are designed for gates and other applications with low radial loads. The barrel hinge acts as a lift off hinge, in that the gate can be lifted off the post with out removing the pin.

The pin is a stainless steel pin to provide corrosion resistance. Bearings consist of one round ball for the thrust bearing and bronze sleeves for radial. Grease fittings come standard to allow preventative maintenance. These hinges are designed to be welded on between the post and gate.

Part No	A	B	C	D	E	Lbs Per Hinge	Capacity
610505	3/8"	1.5	2-1/4	1.5	5	3.3	800
610608	1/2"	2	2-3/4	1.75	6	5.8	1,200
610805	3/4"	2.5	3-1/2	2	8	11.4	2,000

Dimensions in inches.
Weights and capacities in pounds.
Capacities correlate to the weight of the door only and assume a minimum of two hinges per door. Capacities aren't additive.
Call for pricing and delivery.

Standard Features

Item	Standard Features
Pin Material	Stainless Steel
Hinge Material	Mild Steel*
Pin Style	Removable
Mounting Surface	Between Post & Gate
Mounting Method	Weld On
Hand	Interchangeable
Finish	None
Adjustable	Up/Down
Thrust Bearings	Round Ball
Radial Bearings	Bronze Sleeves some models
Lube Fitting	Grease Fitting

Click for Optional Features

* Stainless Steel available upon request

Click 651 Series for self closing gate hinges

Daro Industries, Incorporated. Copyright © 1998 Daro Industries, Incorporated. All rights reserved. Other products and companies referred to herein are trademarks or registered trademarks of the respective companies or mark holders. Information in this document is subject to change without notice. Please request a current print to ensure our product complies with your requirements.

Last updated on 4/20/07